A set of hangers for embroidery, wood (bell pull), embroidery size up to 15 cm

A set consisting of two hangers for embroidery design - an upper holder and a lower "weight".
Size: embroidery size up to 15cm

Material - plywood, 4mm

Embroidery design option:
- powder and iron the embroidery;
- bend the embroidery from the sides;
- glue strips of non-woven fabric of 5 cm from above and below, bend the top and bottom;
- at a distance of 2 cm from the top and bottom, sew the hem;
- open the hanger and slip into the hem;
- close the back part with non-woven fabric.

Another option is to hem the back fabric on the sides and then hem the top and bottom.